您的当前位置:首页 >K690BN >SMAJ18CA-E3/5A-VISHAY 正文

SMAJ18CA-E3/5A-VISHAY

时间:2021-04-23 02:11:01 来源:网络整理编辑:K690BN

核心提示

push({});Where How to Use 2N3906 Transistor:2N3906 can be used in many projects for example it can be used in audio amplifier circuits for general or small amplification requirements.

push({});Where How to Use 2N3906 Transistor:2N3906 can be used in many projects for example it can be used in audio amplifier circuits for general or small amplification requirements.

If the ending alphabet is A then the HFE value will be 110~220.It can also be used as an audio amplifier or in audio amplifier stages of a circuit and any type of general signal amplification purpose.

SMAJ18CA-E3/5A-VISHAY

push({});Where We Can Use How to Use:As described above it is a general purpose device so a user can use it in variety of general electronic application for example it can be used as a preamplifier or in preamplifier stages of an electronic circuits. ApplicationsPreamplifierGeneral purpose audio amplifierGeneral Signal amplificationPNP Darlington pairDrive Load under 100mAHow to Get Long Term Performance To get long term performance with this transistor it is suggested to not drive load more than 100mA and -45V DC.high power transistors and many other components of an electronic circuit.

SMAJ18CA-E3/5A-VISHAY

The transistor is manufactured in three different part numbers like BC556A.if the ending alphabet is B then the HFE value will be 200~450 and if its C then 420~800.

SMAJ18CA-E3/5A-VISHAY

The collector-emitter voltage of the transistor is -65V therefore it can be used to drive loads upto -65V DC with max 100mA current.

On the other hand we can use it as a switch to drive loads under 100mA.push({});Features / technical specifications:Package Type: TO-92Transistor Type: PNP Max Collector Current(IC): -150mAMax Collector-Emitter Voltage (VCE): -50VMax Collector-Base Voltage (VCB): -60VMax Emitter-Base Voltage (VEBO): -5VMax Collector Dissipation (Pc): 250 miliWattMax Transition Frequency (fT): 180 MHzMinimum Maximum DC Current Gain (hFE): 90 – 600Max Storage Operating temperature Should Be: -55 to +150 CentigradeNPN Complementary:NPN Complementary of A733 is C945 Replacement and Equivalent:2N2907.

The maximum collector dissipation is 250mW and DC current gain of upto 600 also makes it ideal to use as an amplifier in many different applications.3V base voltage for saturation due to which it can be used in low voltage operated circuits.

When used as a switch it can drive load under 150mA that is enough to drive relays.com/datasheet-pdf/view/550178/KISEMICONDUCTOR/A733.