您的当前位置:首页 >LM1881N >TZMC18-GS08-VISHAY 正文

TZMC18-GS08-VISHAY

时间:2021-04-17 17:06:53 来源:网络整理编辑:LM1881N

核心提示

The maximum collector-emitter voltage and collector-base voltage is 100V due to which you can use it to drive maximum 100V of load.

The maximum collector-emitter voltage and collector-base voltage is 100V due to which you can use it to drive maximum 100V of load.

The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages.The max transition frequency of the transistor is 300MHz so it will also perform well in RF circuits under 300MHz frequency.

TZMC18-GS08-VISHAY

Always confirm the collector emitter and base pins before placing in circuit.Besides these uses it can also be used in commercial circuits.If accidently placed wrong in a circuit than check its performance again because placing wrong pins sometimes burns the internal circuitry of the transistor or make it weak.

TZMC18-GS08-VISHAY

Do not use or store it in temperature above +150 centigrade and below -65 centigrade.details on where how to use this transistor in an electronic circuit.

TZMC18-GS08-VISHAY

check pin configuration before replacing in a circuit)BC547 Transistor Explained / Description:BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects.

and do not exceed the voltage across this transistor to 45V DC.audio preamplifier stages etc.

With emitter-base voltage of only 5V this transistor can also be used at the output of microcontrollers.For example it can be used to drive high current relay switches.

Due to its good collector dissipation and DC current gain characteristics it can also be used to amplify any type of signal.BC877 (The Pin Configuration of the equivalent transistors shown here may be different from BC338 therefore it is suggested to always check the pinout of the transistor before replacing in the circuit.