您的当前位置:首页 >UCC27714 >VS-10CTQ150S-M3-VISHAY 正文

VS-10CTQ150S-M3-VISHAY

时间:2021-04-17 17:37:18 来源:网络整理编辑:UCC27714

核心提示

The max load should not be increased more than 1.

The max load should not be increased more than 1.

The transistor possesses high gain and low noise features which make it ideal to use for very small or low level signals amplification whether it is an RF signal.do not apply reverse gate to source voltage of more than -25V and always store or operate this transistor in temperature above -65 centigrade and below +150 centigrade.

VS-10CTQ150S-M3-VISHAY

0Max Power Dissipation is: 350mWMax Storage Operating temperature Should Be: -65 to +150 CentigradeLow Noise High GainReplacement and Equivalent:Replacement or equivalent transistors for MPF102 are BF245C.But if you cant find it then you can also use its substitute transistors shown above.)MPF102 Transistor Explained / Description:MPF102 is a very famous JFET transistor used in many commercial devices as well as educational and hobby projects.

VS-10CTQ150S-M3-VISHAY

features and many other useful information about this JFET.com/datasheet-pdf/view/181389/FAIRCHILD/MPF102/+07Q49AVDvHSEIlOpfTXxzzE+/datasheet.

VS-10CTQ150S-M3-VISHAY

 Applications:VHF Signal AmplifierAny Low Level Signal AmplifierAudio PreamplifiersSensor CircuitsAudio Amplifier StagesHow to Safely Long Run in a Circuit:For a good circuit design it is always essential to use all the components without giving them stress or dont use them on their maximum ratings.

2SK518 (Pin configuration of some transistors mentioned here may different from MPF102 therefore check pin configuration before replacing in a circuit.5W due to which it is also ideal to use it in audio amplifier circuits.

The collector emitter and collector base voltage is also very high therefore it can easily survive in an electronic circuit that is operated under 80 volts.This transistor can drive loads upto 1500mA therefore you can drive and control many electronic equipments through it.

push({});Features / technical specifications:Package Type: TO-126Transistor Type: NPNMax Collector Current(IC): 1.Also use a suitable base resistor to provide required base current.