您的当前位置:首页 >SN74LS153N >SN74LS153N 正文

SN74LS153N

时间:2021-04-23 01:56:05 来源:网络整理编辑:SN74LS153N

核心提示

The max load this transistor can handle is 800mA which is enough to drive many loads in an electronic circuits.

The max load this transistor can handle is 800mA which is enough to drive many loads in an electronic circuits.

5A and the maximum pulse current is 2A but a good and suitable heatsink must be required with the transistor to operate it without an problem.This transistor can perform well as a switch and amplifier.

SN74LS153N

This transistor is manufactured in TO-126 package.5A the loads can be high power LEDs.BD136 Transistor Explained / Description:BD136 is another transistor from the BD13x series of PNP and NPN transistors

SN74LS153N

Use a suitable base resistor which provides the required input current to the transistor and always operate or store the transistor in temperature above -55 Celsius and below +150 Celsius.The transition frequency is 150MHz due which it can also be used in RF circuits under 150 MHz frequency spectrum.

SN74LS153N

push({});Features / technical specifications:Package Type: TO-92Transistor Type: PNP Max Collector Current(IC):  –100mAMax Collector-Emitter Voltage (VCE):  –45VMax Collector-Base Voltage (VCB):  –50VMax Emitter-Base Voltage (VEBO):  –5VMax Collector Dissipation (Pc): 400 miliWattMax Transition Frequency (fT): 150 MHzMinimum Maximum DC Current Gain (hFE): 60 – 1000Max Storage Operating temperature Should Be: -55 to +150 CentigradePNP Complementary:NPN Complementary of SS9015 is SS9014Replacement and Equivalent:BC557C.

 Applications:Audio PreamplifiersAudio Amplification StagesSignal AmplifierHearing AidsSensor CircuitsSwitching loads under 100mADarlington PairsHow to Safely Long Run in a Circuit:To get long term and good overall performance with SS9015 in your circuits it is recommended to not drive load of more than 100mA and the load voltage should be less than 45V.The max gain value shows the max amplification of a signal you can achieve from a transistor in an electronic circuit.

This post describes S8050 transistor pinout.It can also be used as amplifier in small amplification stages or as a separate small signal amplifier.

The normal gain value of the transistor are 110 and the maximum gain value is 400.This transistor is designed for audio amplification and wide variety of general purpose uses in electronic circuits.