您的当前位置:首页 >DS594 >DS594 正文

DS594

时间:2021-04-17 16:03:21 来源:网络整理编辑:DS594

核心提示

It is designed to be used for low noise and high gain amplification purposes and it can also used as a switch.

It is designed to be used for low noise and high gain amplification purposes and it can also used as a switch.

2N3904 (Pin configuration of SOME transistors are different from 2N2222.Use a suitable base resistor which provides the required current at the base of the transistor.

DS594

the collector-emitter voltage of the transistor must in under 40Valways operate it below the max collector-emitter voltage.always use a suitable base resistor to provide require base current to the transistor.

DS594

in this post we are going to cover C1815 transistor details about pinout.small audio amplifier (if used to drive small speaker).

DS594

It is designed for audio frequency amplification and high frequency OSC.

Moreover it can also be used as a switch to drive loads under 150mA.always use a good current limiting resistor at the base of the transistor.

and details on using it in an electronic circuit or project.Moreover it can also be used as an alternative or equivalent to many other general purpose transistors and it is also an ideal transistor to use in your hobby electronic projects.

The max collector current is -700mA hence it can also be used for variety of switching application in electronic circuits.push({});Features / Technical Specifications:Package Type: TO-92Transistor Type: PNP Max Collector Current(IC): -0.