您的当前位置:首页 >TI1999 >TI1999 正文

TI1999

时间:2021-04-23 00:52:30 来源:网络整理编辑:TI1999

核心提示

and it can also be used at the output of arduino.

and it can also be used at the output of arduino.

)TIP127 Transistor Explained / Description:TIP127 is a PNP BJT darlington transistor.Apart from that the maximum DC current gain of the transistor is 1000 and the max collector dissipation is 65W due to which it can also be used in audio and other signal amplification purpose.

TI1999

The transistor can drive load of upto 5A.Applications:Audio Power AmplifierAudio Amplifier StagesAudio PreamplifiersDrive Loads under 5ACan be used at the output of microcontrollerHow to Safely Long Run in a Circuit:To get long term performance with TIP127 it is recommended to not operate load of more than 5A through this transistor.The pin configuration of these transistors may be different.

TI1999

If want to use one in the replacement make sure to check the pinout details before replacement in your circuit.The pair of transistor connected in side as darlington increases the transistor gain and performance.

TI1999

If you want to use it as a switch then it can be operated in full saturation mode by providing only 120mA to its base.

But if you are using it in load under 60V then you can also use TIP125 and TIP126 as an accurate replacement for this transistor.It is manufactured in TO-93 package.

It can also be used in RF circuits under 200MHz frequency.Moreover the transistor is also low noise device.

transistors and other parts of a circuit.2SC3198 (Pin configuration of SOME transistors are different from C945.