push({});Features / Technical Specifications:Package Type: TO-92L / TO-92MODTransistor Type:  NPNMax Collector Current(IC): 2AMax Collector-Emitter Voltage (VCE): 50VMax Collector-Base Voltage (VCB): 50VMax Emitter-Base Voltage (VEBO): 5VMax Collector Dissipation (Pc): 900 MiliWattMax Transition Frequency (fT): 100 MHzMinimum Maximum DC Current Gain (hFE): 70– 240Max Storage Operating temperature Should Be: -55 to +150 CentigradePNP Complementary:PNP Complementary of 2SC2655 is 2SA1020.

Always use a suitable heatsinkpush({});Where We Can Use it How to Use:MPSA13 is a high gain dralington transistor and due to its high gain capabilities it can be use where there is a requirement to amplify any type of low gain signals.

The maximum collector current of the transistor is 500mA or 0.Other than that it can be used as a very low current switch and capable to drive load of under 0.In this post we are going to discuss MPSA13 pinout.

MPSA13 is a widely used dalington NPN transistor available in TO-92 package.The maximum collector dissipation is 625mW therefore it can also be used as an amplifier and preamplifier for audio and other signals in electronics.

It is a darlington transistor which means it has two transistors or one pair of same transistors inside connected in a special way that is called darlington pair.

5AMotor Driver CircuitsHow to Safely Long Run in a Circuit:To get long life performance with MPSA13 the user should not drive load of more than 500mA and 30V DC.if the code is -25 then the hFE  will be 160~400 and if the code is -40 then the hFE  will be 250~630.

BC327 is a general purpose PNP transistorthe SS9012 can also be used as a general purpose device in wide variety of electronics applications and it is also a must to have transistor in the electronic lab.

Apart from that this transistor can also be used as a switch to drive loads under 500mA.It can also be used in audio amplification stages of an audio amplifier circuit.