您的当前位置:首页 >50V50V3 >VS-10TQ045-M3-VISHAY 正文

VS-10TQ045-M3-VISHAY

时间:2021-04-17 09:26:56 来源:网络整理编辑:50V50V3

核心提示

An external hard drive is hooked up to the system and the static IP address for file sharing is set up.

An external hard drive is hooked up to the system and the static IP address for file sharing is set up.

a high performance and less memory required algorithm is implemented for VLSI based image scaling processor.This is achieved with non-uniform segmentation and for reducing the size.

VS-10TQ045-M3-VISHAY

Design of On-Chip Bus OCP Protocol with Bus Functionalities: This project implements the Open Core Protocol (OCP) using VHDL for providing the lossless communication.VHDL Implementation of Universal Asynchronous Receiver Transmitter: The main objective of this project is to implement Universal Asynchronous Receiver Transmitter (UART) using VHDL code.This VHDL code is further simulated in MATLAB for checking the results.

VS-10TQ045-M3-VISHAY

Review of 5 stage Pipelined Architecture of 8-Bit Pico Processor: This project demonstrates the increased performance of 8-bit Pico processor by implementing pipelining technique.Design and Implementation of Efficient Systolic Array Architecture: The objective of this project is to develop a hardware model of systolic array multiplier which can be used to perform binary multiplication using VHDL platform.

VS-10TQ045-M3-VISHAY

FPGA Implementation of an LFSR based Pseudorandom Pattern Generator for MEMS Testing: This project presents the implementation of Linear Feedback Shift Register (LFSR) based pseudorandom pattern generator using VHDL on FPGA platform.

Gray-scale filtering is used in Gabor filter deign.The solder paste is segregated into different grades based on the size of the solder balls.

Soldering is one of the most reliable techniques to join two materials without fusing them.you have to follow certain steps precisely.

Solder pastes are prone to oxidation due to the large surface of the solder spheres.Apart from acting as a protective coating.