您的当前位置:首页 >On-Shore Technology, Inc. >R182BA70.38.01_Datasheet PDF 正文

R182BA70.38.01_Datasheet PDF

时间:2021-06-14 00:37:35 来源:网络整理编辑:On-Shore Technology, Inc.

核心提示

Ett rimligt sätt att minimera komplexitet är därför att undvika att skicka den uppåt i hierarkin. Problem som går att lösa på låg nivå påverkar ett fåtal, medan problem som skickas uppåt påverkar fler, samtidigt som de blir svårare att lösa.

Ett rimligt sätt att minimera komplexitet är därför att undvika att skicka den uppåt i hierarkin. Problem som går att lösa på låg nivå påverkar ett fåtal, medan problem som skickas uppåt påverkar fler, samtidigt som de blir svårare att lösa.

The company said ISE 6.2i can program a design twice as fast as the previous version of ISE and that it uses 15 percent less area while improving performance of a Virtex-II Pro 3x over a design completed with the earlier tool.

When ISE 6.2i is used for Spartan-3 FPGAs, the devices are said to deliver faster block RAM access speeds and embedded multipliers running at greater than 225 MHz. Clock-to-output times are 35 to 40 percent faster.

R182BA70.38.01_Datasheet PDF

ISE 6.2i users can also test the software running on Red Hat Enterprise 3, Linux 9.0. Xilinx offers limited support of that version but plans to offer full support with ISE 7.1, due out in a couple of months.

http://www.eet.com

Fremont, Calif. — Bustronic Corp. has expanded its VXI product offering with new 8, 11, and 13-slot C-size backplanes that now use SMT components. Through-hole versions are available.

R182BA70.38.01_Datasheet PDF

The company said the benefit of through-hole applications is easy replacement in the field for components such as capacitors and resistors, while the SMT versions offer more uniformity in solder reflow and a more consistent and efficient manufacturing process.

The Bustronic VXI line offers a custom, laminated busbar to distribute &plusmn24V, &plusmn12V, -5.2V, and 2V throughout the backplane, instead of using a common method of bringing the voltages to the backplane at only one or two points. As a result, the Bustronic VXIbus backplane offers one of the lowest voltage drops in the industry, said the company.

R182BA70.38.01_Datasheet PDF

In addition, the use of 2 oz. copper power planes, four solid ground and two VCC planes, and distributed decoupling capacitors on all voltages helps provide complete power distribution.

The Bustronic VXI backplane line includes automatic active BUSGRANT and IACK jumpering, and a 4-point chassis ground that can be modified to isolate the chassis ground from the digital ground. Ten-layer stripline construction provides superior performance, minimizes crosstalk, and provides for excellent RFI/EMI resistance, said the company. A panel connector for SYS Reset, and a power monitor connector are optional.

GL also offers a brace of turnkey test systems and software, including bulk call generators, programmatic call generators, IP voice quality evaluators, laptop-based protocol test/analyzers, as well as peripheral equipment, such as multi-T1/E1 repeater boxes (good for breaking off a test signal from a device presently in operation).

IBM

IBM (www.ibm.com – 888-839-9289) announced a new IBM eServer BladeCenter T blade server, for early release this year. The eServer BladeCenter T system will extend IBM's existing collaboration with Intel around the IBM eServer BladeCenter product family.

The entry of this new class of blade servers, coupled with the IBM Service Provider Delivery Environment (SPDE) framework, further reinforces IBM's commitment to open industry and IT standards. SPDE gives wireline and wireless telecommunications service providers the flexibility to introduce new, revenue generating voice, text and Internet services to their customers faster, easier and at a lower cost.

The BladeCenter T systems will be both NEBS 3 and ETSI certified.