您的当前位置:首页 >Encoder Products Company >V660LT100BPX2855_Datasheet PDF 正文

V660LT100BPX2855_Datasheet PDF

时间:2021-06-14 01:05:51 来源:网络整理编辑:Encoder Products Company

核心提示

As its prepares to go it alone, the Electronic Devices group struggled in the first fiscal quarter, losing $27 million on sales of $1.97 billion. The group reported semiconductor sales of $1.44 billion, down 3% from the year-ago quarter, while sales of flat-panel displays were up 33% year-over-year, to $251 million. Electronic component sales also fared well, climbing 21%, to $290 million.

As its prepares to go it alone, the Electronic Devices group struggled in the first fiscal quarter, losing $27 million on sales of $1.97 billion. The group reported semiconductor sales of $1.44 billion, down 3% from the year-ago quarter, while sales of flat-panel displays were up 33% year-over-year, to $251 million. Electronic component sales also fared well, climbing 21%, to $290 million.

In spite of these challenges, low-k materials are beginning to enter mainstream production. Dow's SiLK semiconductor dielectric resin was the first true low-k material to be used in production in the 130-nm technology node at a leading chip manufacturer. Based on the latest ITRS targets, we anticipate broad-based low-k materials adoption to take hold beginning in the 90-nm technology node.

V660LT100BPX2855_Datasheet PDF

SBN : Can you comment on reports that IBM is having a difficult time getting Dow's SiLK low-k materials into production at 130-nm?

McClear : All customers who have tried to implement low-k dielectrics (CVD or spin-on) have faced integration challenges– the key differentiator is whether those integration issues can be resolved. We feel that IBM's recent announcement that they have extended SiLK to their 90-nm technology is an affirmation of both this as well as their SiLK strategy.

SBN : What advantages do lower k materials have over FSG?

V660LT100BPX2855_Datasheet PDF

McClear : Given the low-k integration challenges mentioned above, FSG became a stopgap dielectric for a large part of the industry in the 130-nm technology node. According to definitions outlined in the 2001 ITRS, FSG isn't a low-k material at all because its k-value of >3.6 is far too high.

True low-k materials (k-values of <2.7) are="" required="" to="" meet="" the="" device="" performance="" and="" power="" dissipation="" requirements="" of="" the="" future,="" as="" prescribed="" by="" the="" itrs="" and="" predicted="" by="" moore's="" law.="" coupled="" with="" copper="" conductors,="" low-k="" materials="" can="" improve="" device="" performance="" and="" reduce="" power="" dissipation="" by="" nearly="" 20%,="" compared="" to="" cu/fsg="" interconnects.="" ultra="" low-k="" materials=""><2.2) will="" extend="" these="" performance="" gains="" even="" farther.="">

V660LT100BPX2855_Datasheet PDF

Dow's SiLK resin (k=2.6) was the first low-k material in production at the 130-nm technology node. However, those suppliers that chose FSG in the 130-nm technology node will need to move to true low-k materials for the 90-nm node to stay competitive.

SBN : The 2001 ITRS roadmap decelerated” the pace for low-k dielectrics. Can you comment on the matter?

The Reports module can tell you how many site visitors consulted specific articles, what questions that site visitors asked remain unanswered and which employees edited or added content to your knowledge base. We created a report to learn which articles we viewed from our knowledge base over two months. KnowledgeBase.net provided a bar chart containing the information. We also were able to save our report by clicking on an icon that appeared directly above it.

Final Thoughts On KnowledgeBase

Overall, we had no difficultly learning how to use KnowledgeBase.net. But placing the Administration module tab first in the order that the tabs for each module appear in could help users avoid the confusion we experienced.

The order of the tabs you click on to open each module leads you to Administration after you've already filled your knowledge base with content and built a Web page for it. The Flash tutorial also shows you how to set workflows after the lessons about how to create your knowledge base and post it on-line. KnowledgeBase Solutions' Segil agreed with us that reordering the main tabs would make sense.

The software could also be more flexible for remote users. You can only use a 4.0 or higher version of Microsoft Internet Explorer 4.0 to access the software's administration control panel. But to use KnowledgeBase.net from more than one PC, you might need to work with a different browser.