您的当前位置:首页 >API Technologies Corp. >FCXO-12-3SY_Datasheet PDF 正文

FCXO-12-3SY_Datasheet PDF

时间:2021-06-14 00:52:38 来源:网络整理编辑:API Technologies Corp.

核心提示

Second, using a processor that your competition is also using may make it difficult to create a clear differentiation between competing products. As the market grows and competition increases, the number of semiconductor solutions typically increases, which has been the case for smartphone processors.

Second, using a processor that your competition is also using may make it difficult to create a clear differentiation between competing products. As the market grows and competition increases, the number of semiconductor solutions typically increases, which has been the case for smartphone processors.

From Dr. Steven Kelem :

As Chief Architect for Element CXI, I had to come up with a conceptual model of our new architecture. There are different levels of complexity, depending on what aspect of the device is being discussed. For a bit of fun, I came up with a Lego model of the architecture.

FCXO-12-3SY_Datasheet PDF

We found that after a customer has taken our Customer Training course, the Lego model helped solidify the ideas by tying an conceptual (Lego) model to the detailed one that was taught in the course. (Ironically, the abstract model was the tangible, Lego model.)

BOISE, Ida. — Continuing to expand its operations in Asia, Micron Technology Inc. here today announced the groundbreaking of a new IC-assembly and test facility in Singapore.

The 400,000-square-foot facility, to be completed in early-2002, will handle the packaging, assembly, test, and module assembly functions for the supplier of DRAMs, chip sets, and other IC products, said Jen Kwong Hwa, managing director for Micron Semiconductor Asia Pte. Ltd., in Singapore.

FCXO-12-3SY_Datasheet PDF

The plant will support its DRAM manufacturing venture in Singapore, which was acquired from Texas Instruments Inc. Other partners in the venture include Canon, Hewlett-Packard, and the government-sponsored Economic Development Board of Singapore.

I believe that the beginning of this situation” starts with AMD.  Once it pulled out of WSTS, it left Intel exposed” in the database, especially for MPUs. With almost the entire MPU segment comprised of Intel and AMD, without AMD, the WSTS data would essentially be a reflection of Intel's exact MPU sales data, including monthly unit volume shipments and average selling prices (ASPs). I believe this is where the heart of the matter lies, not so much with the monthly MPU sales data in dollars, since Intel reports its MPU sales on a quarterly basis, but with the unit volume and ASP detail! Typically, companies are not too concerned with the public knowing its sales revenue but are much less open when it comes to the public knowing its unit volume shipments, and as a result, its ASP information.

FCXO-12-3SY_Datasheet PDF

A similar situation happened within WSTS in 2004. With Xilinx and Altera holding greater than 90% of the marketshare for PLDs, WSTS merged the PLD category with the standard cell category.  The result of this was to mask” the details of PLD unit volume shipments and ASPs (as well as masking the standard cell shipment details). While the PLD and standard cell data is now less precise that it was previously, at least it is still included in the database.

Going further back in time, it was 1998 when WSTS stopped reporting the bookings (i.e., orders) for semiconductors. I believe that Intel was one of the primary movers behind this change as well as it became uncomfortable with its monthly orders for MPUs being so public, especially when it was oftentimes used by stock analysts to give a favorable or unfavorable rating to a company.

It is also worth noting where the switches are produced, said some suppliers, especially if the customers think they are getting a break on price.

Some competitors choose to manufacture outside the United States, [and that] has extended lead times to 12 to 16 weeks in some cases,” said Ken Sinick, sales manager at Electroswitch Electronic Products. If you have cheaper labor and pricing, you sometimes pay in terms of getting the product out as quickly.”

Buyers may also run into quality problems with smaller offshore manufacturers that are trying to crack the market with lower pricing but without any kind of brand recognition or with little experience in the marketplace, Cherry's Schwert said.

A new trend by OEMs is to look for suppliers that offer a broad range of products as well as capabilities to integrate products into higher levels of assembly, ITT's Wilk noted. It has always been important to offer our customers strong technical support, especially for customized products, which is continuing to be a trend as [a larger number of] customers outsource more of their activities. Providing greater levels of engineering support for assemblies has become more important.

Time-to-market isn't the issue anymore,” Wilk said. It's time-to-revenue.”